£165 +
Free Delivery from Conrad Electronic
Limited Time Offer ( Valid until:
)
Whether you're recording, mixing or mastering - your studio monitors are always the first source. The studio monitors the BX-Series of M-Audio build on a legendary history. In 2009, it was one of the best-selling monitor speakers. Also in the D3 Generation M-Audio for unique functions for musicians and professional recording studios. Special analogue amplifiers provide above-average dynamic and sound accuracy over the entire frequency range, while the Kevlar diaphragm woofer and silk dome with a revised wave guide technology for rich, defined sound.Maximum power-precise soundA powerful 150 Watt Class A/B amplifier delivers a sound level of up to 110 dB, thus even for the loudest and most dynamic mix is enough headroom available. Experience, thanks to the new optimized wave guide, a wide and extraordinary sound for even more vivid sound. A new room correction circuit on the back side makes it possible now to minimize the impact of disturbing bass frequencies - from the cellar to the professional studio - without compromising on the sound quality or stereo image.High-quality componentsIn the development of the BX8 D3 has been paid special attention to first-class parts. High-quality components ensure an ultra-wide, linear frequency response with minimum distortion and low self-noise. Thanks to its 8" - Kevlar woofer (20.3 cm), a powerful low bass to 37 Hz, the BX8 D3 monitor is an extremely long life is guaranteed. Kevlar is due to its strength and temperature resistance a particularly suitable material for loudspeaker diaphragms. The tweeters membrane is manufactured from real silk, which gives you a soft sound, there - quite the contrary to many metal membranes of other monitors, which are often of poor quality. The distortion to a minimum, the tweeter complete from the rest of the housing and provides for a balanced frequency response up to 22 kHz. The integrated amplifier works according to the bi-amping concept, reinforced tweeter and bass can be separately. In connection with a finely tuned crossover is thus guarantees that both in the high as well as low frequency range only those frequencies are sent, the optimal can be played back. The depth of frequency separation at 1900 Hz provides for a wide-ranging, almost distortion-free signal output within the critical center frequencies. As a result, you receive with the BX8 D3 sound accuracy even in complex sounds via the entire frequency range.Innovative housing designThe design of the BX8 D3-housing is more than just a case. It is with all its components on an excellent sound reproduction aligned - its rounded corners reduce edges reflections and offer best possible sound image. The special, computer-calculated bass reflex opening on the back of the monitor has been designed for the minimization of flow noise and resulting distortions developed and also provides for an extended low-frequency range. A completely newly developed custom wave guide to the tweeter provides for a broad and accurate sound, which is free from unwanted diversions. When listening is the ideal, central position (the so-called sweet spot) between the two speakers particularly important - there is the stereo image is the best. BX8 D3 is equipped with an LED, so that you can easily determine the sweet spot. You are in the optimum listening position, if the LEDs at the brightest light up. In addition, the legendary front design of the BX8 D3-M-Audio's famous "keyhole"-design - for more than just an attractive look: this special screw-less design ensures that no interference or resonances of the speaker.For professionals and for beginnersCountless professionals use M-Audio Studio monitors to produce and mix-like this, music and sounds, as we listen to you again and again. With the same design philosophy and technology one can live out his passion for great sound - the BX D3 series makes it possible. With the BX8 D3 do you know exactl... More
